 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Xiamen Hualian Electronics Co. , Ltd. SPECIFICATION DESCRIPTION: RED BRIGHT LED MODELHFR165-1 05926037469 05926037471 E-mail xmhlec@public.xm.fj.cn Website : www.xmhl.com 361006 PDF "pdfFactory Pro" www.fineprint.com.cn RED BRIGHT LED SPECIFICATION HFR165-1 1FEATURES: Low Drive Current, High Intensity of Light Emission. Fast Response Time , Pulse Driven. PARAMETER Forward Current Reverse Voltage Power Dissipation Operating Temperature Storage Temperature 3 (1) Soldering Heat (3s) Red Diffused Plastic Molding. SYMBOL IFM VR PD Topr Tstg Tsol RATING UNIT mA V mW 2ABSOLUTE MAXIMUM RATINGS(Ta=25): 25 5 75 -20+75 -40+100 260 (1) 2 mm Up to 2 mm from the body. 3OPTOELECTRIC CHARACTERISTICS(Ta=25): PARAMETER Forward Voltage Reverse Current Luminous Intensity Peak Wave Length Spectral Line Half Width SYMBOL VF IR IV P TEST CONDITION MIN TYP MAX UNIT IF10mA VR 5V IF10mA IF10mA IF10mA 4.0 1.9 630 40 2.5 10 V A mcd nm nm 2002 6 2 7 PDF "pdfFactory Pro" www.fineprint.com.cn RED BRIGHT LED SPECIFICATION HFR165-1 4DIMENSION 1. Anode 2. Cathode 2002 6 3 7 PDF "pdfFactory Pro" www.fineprint.com.cn RED BRIGHT LED SPECIFICATION HFR165-1 Packing 2 6.1 95x200mm 500 / 2 Internally packed with 95x200mm plastic bags, 500pcs/bag. 6 95 40 40 200 XIAMEN HUALIAN ELEC TRON ICS C O.LT D. MADE IN CHINA 6.2 (220x220x190mm) 3 10000 / Externally Packed with 220x220x190mm3 cartons, 10000 pcs/carton. 6.3 Label P/N: Lot No. Qty. Insp. Xiamen Hualian Electronics Co.., Ltd. 7 Precautions 7.1 Forming 2002 6 4 7 PDF "pdfFactory Pro" www.fineprint.com.cn 6 RED BRIGHT LED SPECIFICATION HFR165-1 1Leads should be formed before soldering. 2Do not form the leads with their bases as a fulcrum. 3 5mm Forming location should be up to 5mm from the epoxy body. 7.2 Installation LED PCB Installation on PCB do not apply physical stress to the leads when mounting LED lamps on PCB. Correct 7.3 Soldering Wrong 1Do not dip epoxy body into solder bath. 2Do not apply stress to the leads while they are heated. 3 30W 3 When soldering LED, the solder iron power should be not more than 30W and with the soldering time not more than 3 seconds. 9.4 Cleaning 1 1 In any case, the cleaning time should be 1 minute or less at a normal temperature. 2 Do not clean LEDs with water as the remains may rust the leads. Alcohol is suggested to be used. 3 LED 300W 30 PCB LED PCB LED When LEDs are ultrasonic-washed, use the ultrasonic output power of less than 300W and the time of less than 30s; do not let the PCB and LEDs touch on the oscillator; do not resonate the LEDs attached on the PCB. 2002 6 5 7 PDF "pdfFactory Pro" www.fineprint.com.cn RED BRIGHT LED SPECIFICATION HFR165-1 Suggested way of usage. 8 LED 20mA When using LED, it must use a protective resistor in series with DC current about 20 mA. 2002 6 6 7 PDF "pdfFactory Pro" www.fineprint.com.cn |
Price & Availability of HFR165-1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |